Description
- Add or remove the shimmer layer from the reverb. A long press of the footswitch seamlessly transitions between shimmer and reverb only.
- Mono input & output makes setup quick and simple. Easy access to inputs and outputs makes this pedal perfect for on-the-go use.
- Analog dry signal for low noise and zero latency. Maintain the integrity of your source tone.
- Small footprint with top jacks, the Wet Reverb is pedalboard-friendly. You can easily fit the Wet in any setup, no matter how tight.
- Powered from a standard 9V pedal power supply (not included), the SeraphimShimmer draws less than 100 mA and can be powered by your existing pedalboard’s power supply. No need to run a separate power adapter or free up a power port for a hungry, high-current device.
- Manufactured locally in Orange County, California. Family owned and operated, Neunaber Audio is dedicated to bringing you the highest quality audio effects on the market.
| Electrical | |
| Nominal input level | -10 dBV, instrument level |
| Input impedance | 1 MΩ |
| Frequency response, dry / bypassed | 20 Hz — 30 kHz, +/-1 dB |
| Total harmonic distortion, dry / bypassed | 0.01% |
| Power | |
| Input | 9-12 V DC, 100 mA |
| Connector | center-negative, 5.5 mm OD x 2.1 mm ID |
| Physical | |
| Dimensions | 115 mm L, 64 mm W, 46 mm H / 4.6" L, 2.6" W, 1.9" H |
| Weight | 190 g / 6.7 oz |
| *See User Guide for complete specifications. Specifications subject to change without notice. |
Reviews
There are no reviews for this product.
